zar@jexdry.com +86 137 7501 3369
JEXDRY Logo
Industrial Dryer Manufacturer Since 1998

Industrial Drying 
Equipment & Systems

Customized around your material, capacity, moisture target and process requirements.

Discuss Your Material Explore Drying Equipment

Material Testing Available

Verify drying performance

Direct Engineer Involvement

Expert guidance & design

Complete System Integration

End-to-end solutions

FAT & English Technical Support

Global service network

Industrial Drying Solutions Built 
Around Your Material

Powders Granules Filter Cakes Liquids

We start with your material and process requirements—not with a standard machine.

Material form & characteristics Initial & target moisture Required processing capacity Heat sensitivity Stickiness & flowability Particle-size requirements Corrosiveness Solvent recovery Available heat source Exhaust & odor treatment

Sludge, Filter Cake & Paste

High-moisture, sticky residues requiring powerful agitation or indirect heating. Often processed with Paddle Dryers, Spin Flash Dryers, or Vacuum Rake Dryers.

Liquid, Solution & Slurry

Pumpable liquids that need to be transformed directly into dry powders or granules. Primarily processed using customized Spray Dryers.

Heat-Sensitive Materials

Pharmaceuticals, biologicals, or chemicals that degrade at high temperatures or oxidize easily. Processed using Vacuum Dryers or low-temperature systems.

Granules, Fibers & Bulk

Free-flowing solids requiring uniform moisture reduction without structural damage. Suitable for Belt Dryers, Fluid Bed Dryers, or Rotary Dryers.

Final equipment selection depends on material testing and specific process requirements.

Submit Your Material

Industrial Drying Technologies

Different materials require different heat-transfer methods, operating conditions and equipment configurations. JEXDRY selects and customizes the 

drying technology according to your application.

Industrial Paddle Dryer

Paddle Dryers

Designed for sludge, filter cakes, pastes, and high-moisture materials requiring continuous indirect heat transfer and robust agitation.

Learn More
Industrial Spray Dryer

Spray Dryers

Engineered to rapidly transform solutions, emulsions, or pumpable slurries directly into dry, uniform powder products in seconds.

Learn More
Spin Flash Dryer System

Spin Flash Dryers

Ideal for filter cakes, cohesive pastes, and wet powders that require simultaneous mechanical dispersion, crushing, and rapid drying.

Learn More
Vacuum Drying Equipment

Vacuum Dryers

Specialized for heat-sensitive, easily oxidized materials, or applications requiring strict low-temperature drying and solvent recovery.

Learn More
Continuous Belt Dryer

Fluid Bed Dryers

Crafted for fluid bed dryers, this solution ensures uniform moisture removal or low-temperature processing, ideal for granules, fibers, and bulk materials.

Learn More
Industrial Rotary Dryer

Rotary Dryers 

Heavy-duty rotary dryers for minerals, industrial solids, and batch drying, designed for high-volume use in diverse settings.

Learn More

JEXDRY can supply not only the dryer, but also feeding, conveying, heating, dust collection, exhaust-gas treatment, odor control and electrical-control systems.

View All Drying Equipment

Drying Equipment for Industrial Applications

Chemical Processing Plant

Chemicals & Fine Chemicals

Pigments, polymers, catalysts, salts, specialty chemicals and chemical filter cakes.

Learn More
Sludge Treatment Facility

Sludge Treatment

Municipal sludge, industrial sludge, wastewater sludge and other high-moisture residues.

Learn More
Pharmaceutical Manufacturing

Pharmaceuticals

APIs, intermediates, extracts and heat-sensitive pharmaceutical materials.

Learn More
Food Ingredients Processing

Food & Ingredients

Proteins, starches, flavors, extracts, powders and other food ingredients.

Learn More
Battery Materials Production

Battery & Advanced Materials

Lithium compounds, battery materials, carbon materials and specialty powders.

Learn More
Minerals and Bulk Materials

Minerals & Ceramics

Minerals, ceramics, fertilizers, fibers and other bulk industrial materials.

Learn More

From Material Testing to Project Delivery

A reliable drying project begins with understanding the material and 

ends with verified equipment performance and clear technical support.

1

Material Evaluation

Assess material & requirements.

2

Pilot Testing

Verify drying feasibility.

3

Process Selection

Determine equipment type.

4

Custom Design

Complete system engineering.

5

Manufacturing

Fabrication & inspection.

6

FAT

Pre-shipment acceptance.

7

Delivery & Support

Docs & commisioning help.

Learn About Material Testing See How JEXDRY Works

Drying Projects with Verifiable Process Data

Equipment photographs show what we manufacture. 

Project data shows whether the drying solution matches the application.

Chemical Sludge Drying Project

Two-Stage Sludge Drying System – Europe

  • Material: Industrial Wastewater Sludge
  • Industry: Environmental Treatment
  • Dryer Selected: Two-Stage Paddle Dryer
  • Capacity: 2,000 kg/h Design Capacity
  • Initial Moisture: 90%
  • Final Moisture: 5% Target
  • Heat Source: Steam
  • Scope: Sludge storage, conveying, two-stage paddle drying, cyclone separation, wet scrubbing and control system.
Result: Reduce 2,000 kg/h of wet sludge to approximately 210 kg/h of dried material, with dust collection and wet exhaust treatment included in the same line.
Battery Material Drying System

Ginger & Turmeric Extract Spray Drying System – Asia

  • Material: Ginger and Turmeric Extract
  • Industry: Food & Botanical Ingredients
  • Dryer Selected: LPG-100 Spray Dryer
  • Capacity: 80 kg/h Liquid Feed
  • Initial Moisture: Approx. 70%
  • Final Moisture: 2%
  • Heat Source: LPG
  • Scope: Feeding, LPG heating, centrifugal atomization, cyclone collection, wet scrubbing and PLC control.
Result: Target output of approximately 25 kg/h of powder at 2% moisture, with a powder collection rate of about 95%.
Food Ingredient Drying Project

Heat-Sensitive Chemical Vacuum Drying – America

  • Material: Heat-Sensitive Chemical Powder 
  • Industry: Chemical Processing
  • Dryer Selected: ZPD-500 Vacuum Rake Dryer
  • Capacity: Up to 130 kg per Batch
  • Initial Solvent: 20%
  • Final Solvent: <0.05%
  • Heat Source: Electrically Heated Hot Water
  • Scope: Vacuum rake dryer, condenser, buffer tank, water-ring vacuum pump, hot-water heating unit and explosion-proof controls.
Result: Target solvent content below 0.05% from an initial 20%, with drying carried out at 20–80°C to limit heat exposure.
View More Project Cases

Customers at JEXDRY

Customers visit our factory to discuss their materials, review equipment configurations and see how industrial drying equipment 

is manufactured and tested.

French customer visiting JEXDRY industrial drying equipment factory in Changzhou
France | Industrial Oven Discussion
Lithuanian client reviewing drying equipment configurations with JEXDRY engineers
Lithuania | Equipment and Process
Serbian customer discussing a vacuum drying project at the Changzhou factory
Serbia | Vacuum Drying Project
Australian client observing material testing process for custom drying system
Australia | Material Testing Observation
German client inspecting fluid bed dryer manufacturing quality
Germany | Fluid Bed Dryer Inspection
USA customer conducting Factory Acceptance Test for custom drying system
USA | Custom System FAT
Brazilian wholesale partner reviewing rotary dryer specifications
Brazil | Rotary Dryer Configuration
Japanese enterprise buyer discussing precision drying technology
Japan | Precision Drying Technology

See How JEXDRY Drying Equipment Is Made

Inside JEXDRY Factory Video

See the real processes behind JEXDRY equipment, including material preparation, welding, machining, polishing, assembly, trial operation and factory acceptance testing.

Welding and fabrication of industrial dryer Machining and polishing components Equipment assembly process Trial operation and FAT
About JEXDRY

Frequently Asked Questions About 
Industrial Drying Equipment

What information is needed to select an industrial dryer?
To accurately select an industrial dryer, we need to know the material name, initial moisture content, target final moisture, required processing capacity (kg/h), and any specific temperature limitations. Additional details like heat source availability and plant space are also highly beneficial.
Can JEXDRY test my material before equipment selection?
Yes, material testing is a core part of our process. You can send material samples to our facility in China. We will conduct pilot tests using appropriate drying equipment to determine feasibility, optimize parameters, and guarantee the performance of the final customized system.
Does JEXDRY provide complete drying systems?
Absolutely. We design and manufacture complete drying systems. Beyond the main dryer, our scope can include wet material feeding units, dry product conveying, heat exchangers, cyclone separators, bag filters, exhaust gas scrubbers, and integrated PLC control panels.
Which dryer is suitable for sludge, filter cake or paste?
For high-moisture, sticky materials like sludge or filter cake, a paddle dryer or spin flash dryer is typically recommended. Paddle dryers offer excellent indirect heat transfer for continuous processing, while spin flash dryers are ideal for rapid drying combined with mechanical dispersion.
Can the equipment be customized for my heat source and plant layout?
Yes. Every industrial dryer we build is custom-engineered. We can configure the heating system to utilize your available steam, thermal oil, natural gas, or electricity. We also tailor the equipment footprint and orientation to integrate seamlessly into your existing plant layout.
What technical documents and commissioning support are available?
We provide comprehensive English technical documentation, including General Arrangement (GA) drawings, P&ID, electrical schematics, and operation manuals. For commissioning, we offer remote video support or can dispatch engineers to your site for installation guidance and training.

Discuss Your Drying Project

Tell us what material you need to dry and your required capacity. Our team will review your application and recommend a suitable drying process and equipment configuration.

JEXDRY Material Testing and Custom Drying Systems

Direct Contact

WhatsApp

If available, you may also include moisture content, heat source, operating hours and target product requirements.

Supported formats: PDF, JPG, PNG, STEP, IGES, STL, DWG (Max 20MB)

Your information will only be used to evaluate your drying project.